Connection is simple for 4-bit bus as:
Showing posts with label Basic Compiler. Show all posts
Showing posts with label Basic Compiler. Show all posts
Monday, December 1, 2008
Interfacing LCD Module by BASCOM AVR --- SIMPLE !!!
BASCOM has build-in library for standard LCD module interface, setting in IDE as:
Connection is simple for 4-bit bus as:
Connection is simple for 4-bit bus as:
Thursday, November 20, 2008
Serial One Pin LCD Module by 89C2051
There years ago, I am working on several design related to a tiny but powerful MCU 89C2051.
Interface a 16x2 character LCD module by 89C2051 and programed by BASCOM 8051.
89C2051 as the LCD Module interface controller so that I can use only one pin to put ALL LCD module command to the LCD Module. I think this idea is great and start to make:
Interface a 16x2 character LCD module by 89C2051 and programed by BASCOM 8051.
89C2051 as the LCD Module interface controller so that I can use only one pin to put ALL LCD module command to the LCD Module. I think this idea is great and start to make:
- Serial One Pin LCD Module with several options
- Serial One Pin keyboard matrix reading
- Serial One Pin I/O expander
- Serial One Pin 4-digit LED display (7-segement Read LED unit)
Thursday, November 13, 2008
Basic Stamp Divided by Four!
Free version of Famlous Basic Stamp.
I do not own any version of Offical Basic Stamp Module as I think it it too expensive (compared with it's function).
But I find that this little toy is so fun to do simple experiment for MCU Newbies.
I have tried this BS4 (Basic Stamp divided by Four) about 3 years ago. It work but the function is simple (& simple), suitable for beginer.
Just burn the fireware by Programmer and assemble.
Antti's has just 64, which is the internal data eeprom storage of the PIC16C84 and PIC16F84 EEPROM version PICmicros. It appears that possible additional development on this project is not forthcoming, so Antti has granted me permission to place this code on the web free for personal use only.
http://www.dontronics.com/bs4.html
Wednesday, November 12, 2008
BASCOM AVR Basic Compiler
Due to the good feeling on the "BASCOM 8051 Basic Compiler", once I try to use ATMEL AVR (ATmega & ATTiny), I start from this "BASCOM AVR Basic Compiler".
Comment = VERY VERY Good!!!
Key Benefits
Structured BASIC with labels.
Structured programming with IF-THEN-ELSE-END IF, DO-LOOP, WHILE-WEND, SELECT- CASE.
Fast machine code instead of interpreted code.
Variables and labels can be as long as 32 characters.
Bit, Byte, Integer, Word, Long, Single, Double and String variables.
Large set of Trig Floating point functions. Date & Time calculation functions.
Compiled programs work with all AVR microprocessors that have internal memory.
Statements are highly compatible with Microsoft’s VB/QB.
Special commands for LCD-displays , I2C chips and 1WIRE chips, PC keyboad, matrix keyboad, RC5 reception, software UART, SPI , graphical LCD, send IR RC5, RC6 or Sony code. TCP/IP with W3100A chip.
Local variables, user functions, library support.
Integrated terminal emulator with download option..
Integrated simulator for testing.
Integrated ISP programmer (application note AVR910.ASM).
Integrated STK200 programmer and STK300 programmer. Also supported is the low cost Sample Electronics programmer. Can be built in 10 minutes! Many other programmers supported via the Universal Interface.
Editor with statement highlighting.
Context sensitive help.
Perfectly matches the DT006 SimmStick from Dontronics and the MAVRIC and the M128 REV B from BDMICRO.
DEMO version compiles 2KB of code. Well suited for the AT90S2313.
English an German Books available
Special tcp/ip library, AT mouse simulator, AT keyboard simulator available as add on.
The following statements are supported (actually there are many more look in the helpfile):
Decision and structuresIF, THEN, ELSE, ELSEIF, END IF, DO, LOOP, WHILE, WEND, UNTIL, EXIT DO, EXIT WHILE, FOR, NEXT, TO, STEP, EXIT FOR, ON .. GOTO/GOSUB, SELECT, CASE.
Input and outputPRINT, INPUT, INKEY, PRINT, INPUTHEX, LCD, UPPERLINE, LOWERLINE,DISPLAY ON/OFF, CURSOR ON/OFF/BLINK/NOBLINK, HOME, LOCATE, SHIFTLCD LEFT/RIGHT, SHIFTCURSOR LEFT/RIGHT, CLS, DEFLCDCHAR, WAITKEY, INPUTBIN, PRINTBIN, OPEN, CLOSE, DEBOUNCE, SHIFTIN, SHIFTOUT, GETATKBD, SPC, SERIN, SEROUT
Numeric functionsAND, OR, XOR, INC, DEC, MOD, NOT, ABS, BCD, LOG, EXP, SQR, SIN,COS,TAN,ATN, ATN2, ASIN, ACOS, FIX, ROUND, MOD, SGN, POWER, RAD2DEG, DEG2RAD, LOG10, TANH, SINH, COSH.
I2CI2CSTART, I2CSTOP, I2CWBYTE, I2CRBYTE, I2CSEND and I2CRECEIVE.
1WIRE1WWRITE, 1WREAD, 1WRESET, 1WIRECOUNT, 1WSEARCHFIRST, 1WSEARCHNEXT.
SPISPIINIT, SPIIN, SPIOUT, SPIMOVE.
Interrupt programmingON INT0/INT1/TIMER0/TIMER1/SERIAL, RETURN, ENABLE, DISABLE, COUNTERx, CAPTUREx, INTERRUPTS, CONFIG, START, LOAD.
Bit manipulationSET, RESET, ROTATE, SHIFT, BITWAIT, TOGGLE.
VariablesDIM, BIT , BYTE , INTEGER , WORD, LONG, SINGLE, STRING , DEFBIT, DEFBYTE, DEFINT, DEFWORD.
MiscellaneousREM, ' , SWAP, END, STOP, CONST, DELAY, WAIT, WAITMS, GOTO, GOSUB, POWERDOWN, IDLE, DECLARE, CALL, SUB, END SUB, MAKEDEC, MAKEBCD, INP,OUT, ALIAS, DIM , ERASE, DATA, READ, RESTORE, INCR, DECR, PEEK, POKE, CPEEK, FUNCTION, READMAGCARD, BIN2GREY, GREY2BIN, CRC8, CRC16, CHECKSUM.
Compiler directives$INCLUDE, $BAUD and $CRYSTAL, $SERIALINPUT, $SERIALOUTPUT, $RAMSIZE, $RAMSTART, $DEFAULT XRAM, $ASM-$END ASM, $LCD, $EXTERNAL, $LIB.
String manipulationSTRING, SPACE, LEFT, RIGHT, MID, VAL, HEXVAL, LEN, STR, HEX, LTRIM, RTRIM, TRIM, LCASE, UCASE, FORMAT, FUSING, INSTR.
And many other functions, statements and directives
To make a program takes just a few steps :
Write the program in BASIC
Compile it to fast machine binary code
Test the result with the integrated simulator(with additional hardware you can simulate the hardware too).
Program the chip with one of the integrated programmers.(hardware must be purchased separately)
Comment = VERY VERY Good!!!
Key BenefitsStructured BASIC with labels.
Structured programming with IF-THEN-ELSE-END IF, DO-LOOP, WHILE-WEND, SELECT- CASE.
Fast machine code instead of interpreted code.
Variables and labels can be as long as 32 characters.
Bit, Byte, Integer, Word, Long, Single, Double and String variables.
Large set of Trig Floating point functions. Date & Time calculation functions.
Compiled programs work with all AVR microprocessors that have internal memory.
Statements are highly compatible with Microsoft’s VB/QB.
Special commands for LCD-displays , I2C chips and 1WIRE chips, PC keyboad, matrix keyboad, RC5 reception, software UART, SPI , graphical LCD, send IR RC5, RC6 or Sony code. TCP/IP with W3100A chip.
Local variables, user functions, library support.
Integrated terminal emulator with download option..
Integrated simulator for testing.
Integrated ISP programmer (application note AVR910.ASM).
Integrated STK200 programmer and STK300 programmer. Also supported is the low cost Sample Electronics programmer. Can be built in 10 minutes! Many other programmers supported via the Universal Interface.
Editor with statement highlighting.
Context sensitive help.
Perfectly matches the DT006 SimmStick from Dontronics and the MAVRIC and the M128 REV B from BDMICRO.
DEMO version compiles 2KB of code. Well suited for the AT90S2313.
English an German Books available
Special tcp/ip library, AT mouse simulator, AT keyboard simulator available as add on.
The following statements are supported (actually there are many more look in the helpfile):
Decision and structuresIF, THEN, ELSE, ELSEIF, END IF, DO, LOOP, WHILE, WEND, UNTIL, EXIT DO, EXIT WHILE, FOR, NEXT, TO, STEP, EXIT FOR, ON .. GOTO/GOSUB, SELECT, CASE.
Input and outputPRINT, INPUT, INKEY, PRINT, INPUTHEX, LCD, UPPERLINE, LOWERLINE,DISPLAY ON/OFF, CURSOR ON/OFF/BLINK/NOBLINK, HOME, LOCATE, SHIFTLCD LEFT/RIGHT, SHIFTCURSOR LEFT/RIGHT, CLS, DEFLCDCHAR, WAITKEY, INPUTBIN, PRINTBIN, OPEN, CLOSE, DEBOUNCE, SHIFTIN, SHIFTOUT, GETATKBD, SPC, SERIN, SEROUT
Numeric functionsAND, OR, XOR, INC, DEC, MOD, NOT, ABS, BCD, LOG, EXP, SQR, SIN,COS,TAN,ATN, ATN2, ASIN, ACOS, FIX, ROUND, MOD, SGN, POWER, RAD2DEG, DEG2RAD, LOG10, TANH, SINH, COSH.
I2CI2CSTART, I2CSTOP, I2CWBYTE, I2CRBYTE, I2CSEND and I2CRECEIVE.
1WIRE1WWRITE, 1WREAD, 1WRESET, 1WIRECOUNT, 1WSEARCHFIRST, 1WSEARCHNEXT.
SPISPIINIT, SPIIN, SPIOUT, SPIMOVE.
Interrupt programmingON INT0/INT1/TIMER0/TIMER1/SERIAL, RETURN, ENABLE, DISABLE, COUNTERx, CAPTUREx, INTERRUPTS, CONFIG, START, LOAD.
Bit manipulationSET, RESET, ROTATE, SHIFT, BITWAIT, TOGGLE.
VariablesDIM, BIT , BYTE , INTEGER , WORD, LONG, SINGLE, STRING , DEFBIT, DEFBYTE, DEFINT, DEFWORD.
MiscellaneousREM, ' , SWAP, END, STOP, CONST, DELAY, WAIT, WAITMS, GOTO, GOSUB, POWERDOWN, IDLE, DECLARE, CALL, SUB, END SUB, MAKEDEC, MAKEBCD, INP,OUT, ALIAS, DIM , ERASE, DATA, READ, RESTORE, INCR, DECR, PEEK, POKE, CPEEK, FUNCTION, READMAGCARD, BIN2GREY, GREY2BIN, CRC8, CRC16, CHECKSUM.
Compiler directives$INCLUDE, $BAUD and $CRYSTAL, $SERIALINPUT, $SERIALOUTPUT, $RAMSIZE, $RAMSTART, $DEFAULT XRAM, $ASM-$END ASM, $LCD, $EXTERNAL, $LIB.
String manipulationSTRING, SPACE, LEFT, RIGHT, MID, VAL, HEXVAL, LEN, STR, HEX, LTRIM, RTRIM, TRIM, LCASE, UCASE, FORMAT, FUSING, INSTR.
And many other functions, statements and directives
To make a program takes just a few steps :
Write the program in BASIC
Compile it to fast machine binary code
Test the result with the integrated simulator(with additional hardware you can simulate the hardware too).
Program the chip with one of the integrated programmers.(hardware must be purchased separately)
BASCOM 8051 Basic Compiler
This is the first Basic compiler on MCU project at few years ago and till now it is still my favourite. Simple, Easy to use and FREE (demo version can run 4K code).
It work fit with ATMEL 89C51 and 89c4051.
Key Benefits
Structured BASIC with labels.
Structured programming with IF-THEN-ELSE-END IF, DO-LOOP, WHILE-WEND, SELECT- CASE.
Fast machine code instead of interpreted code.
Variables and labels can be as long as 32 characters.
Bit, Byte, Integer, Word, Long, Single and String variables.
Compiled programs work with any 8051 uP such as AT89C1051, AT89C2051, 8031, 8032, 8051, 8052, 80552, 80535 and 80537 m Processors.
Statements are highly compatible with Microsoft’s VB/QB.
Special commands for LCD-displays , I2C chips and 1WIRE chips.
Integrated terminal emulator with download option..
Integrated simulator for testing.
Integrated flash programmer and support for SPI, PG2051, PG302, SE512, SE514, TAFE. (hardware can be purchased separately)
Editor with statement highlighting.
Context sensitive help.
For compatibility with BASCOM LT, there is also a 32-bit version of the BASCOM LT compiler.
The following statements are supported :
Decision and structuresIF, THEN, ELSE, ELSEIF, END IF, DO, LOOP, WHILE, WEND, UNTIL, EXIT DO, EXIT WHILE, FOR, NEXT, TO, DOWNTO, STEP, EXIT FOR, ON .. GOTO/GOSUB, SELECT, CASE.
Input and outputPRINT, INPUT, INKEY, PRINTHEX, INPUTHEX, LCD, UPPERLINE, LOWERLINE,DISPLAY ON/OFF, CURSOR ON/OFF/BLINK/NOBLINK, HOME, LOCATE, SHIFTLCD LEFT/RIGHT, SHIFTCURSOR LEFT/RIGHT, CLS, DEFLCDCHAR, WAITKEY, INPUTBIN, PRINTBIN, LCDHEX, OPEN, CLOSE, DEBOUNCE, SHIFTIN, SHIFTOUT.
Numeric functionsAND, OR, XOR, INC, DEC, MOD, NOT, ABS, BCD.
I2CI2CSTART, I2CSTOP, I2CWBYTE, I2CRBYTE, I2CSEND and I2CRECEIVE.
1WIRE1WWRITE, 1WREAD, 1WRESET.
SPISPIINIT, SPIIN, SPIOUT.
Interrupt programmingON INT0/INT1/TIMER0/TIMER1/SERIAL, RETURN, ENABLE, DISABLE, PRIORITY SET/RESET, COUNTERx, CAPTUREx, INTERRUPTS, CONFIG, START, LOAD.
Bit manipulationSET, RESET, ROTATE, BITWAIT.
VariablesDIM, BIT , BYTE , INTEGER , WORD, LONG, SINGLE, STRING , DEFBIT, DEFBYTE, DEFINT, DEFWORD.
MiscellaneousREM, ' , SWAP, END, STOP, CONST, DELAY, WAIT, WAITMS, GOTO, GOSUB, POWERDOWN, IDLE, DECLARE, CALL, SUB, END SUB, MAKEDEC, MAKEBCD, INP,OUT, ALIAS, DIM , ERASE, DATA, READ, RESTORE, INCR, DECR, PEEK, POKE, CPEEK, GETRC5.
Compiler directives$INCLUDE, $NOINIT, $BAUD and $CRYSTAL, $OBJ, $SERIALINPUT, $SERIALOUTPUT, $ROMSTART, $RAMSIZE, $RAMSTART, $MONSTART, $IRAMSTART, $DEFAULT XRAM, $ASM-$END ASM, $LCD.
Conditional compilation#IF, #ELSE, #ENDIF
String manipulationSTRING, SPACE, LEFT, RIGHT, MID, VAL, HEXVAL, LEN, STR, HEX, LCASE, UCASE
To make a program takes just a few steps :
Write the program in BASIC
Compile it to fast machine binary code
Test the result with the integrated simulator(with additional hardware you can simulate the hardware too)
Program the chip with one of the integrated programmers.(hardware must be purchased separately)
It work fit with ATMEL 89C51 and 89c4051.
Key Benefits
Structured BASIC with labels.
Structured programming with IF-THEN-ELSE-END IF, DO-LOOP, WHILE-WEND, SELECT- CASE.
Fast machine code instead of interpreted code.
Variables and labels can be as long as 32 characters.
Bit, Byte, Integer, Word, Long, Single and String variables.
Compiled programs work with any 8051 uP such as AT89C1051, AT89C2051, 8031, 8032, 8051, 8052, 80552, 80535 and 80537 m Processors.
Statements are highly compatible with Microsoft’s VB/QB.
Special commands for LCD-displays , I2C chips and 1WIRE chips.
Integrated terminal emulator with download option..
Integrated simulator for testing.
Integrated flash programmer and support for SPI, PG2051, PG302, SE512, SE514, TAFE. (hardware can be purchased separately)
Editor with statement highlighting.
Context sensitive help.
For compatibility with BASCOM LT, there is also a 32-bit version of the BASCOM LT compiler.
The following statements are supported :
Decision and structuresIF, THEN, ELSE, ELSEIF, END IF, DO, LOOP, WHILE, WEND, UNTIL, EXIT DO, EXIT WHILE, FOR, NEXT, TO, DOWNTO, STEP, EXIT FOR, ON .. GOTO/GOSUB, SELECT, CASE.
Input and outputPRINT, INPUT, INKEY, PRINTHEX, INPUTHEX, LCD, UPPERLINE, LOWERLINE,DISPLAY ON/OFF, CURSOR ON/OFF/BLINK/NOBLINK, HOME, LOCATE, SHIFTLCD LEFT/RIGHT, SHIFTCURSOR LEFT/RIGHT, CLS, DEFLCDCHAR, WAITKEY, INPUTBIN, PRINTBIN, LCDHEX, OPEN, CLOSE, DEBOUNCE, SHIFTIN, SHIFTOUT.
Numeric functionsAND, OR, XOR, INC, DEC, MOD, NOT, ABS, BCD.
I2CI2CSTART, I2CSTOP, I2CWBYTE, I2CRBYTE, I2CSEND and I2CRECEIVE.
1WIRE1WWRITE, 1WREAD, 1WRESET.
SPISPIINIT, SPIIN, SPIOUT.
Interrupt programmingON INT0/INT1/TIMER0/TIMER1/SERIAL, RETURN, ENABLE, DISABLE, PRIORITY SET/RESET, COUNTERx, CAPTUREx, INTERRUPTS, CONFIG, START, LOAD.
Bit manipulationSET, RESET, ROTATE, BITWAIT.
VariablesDIM, BIT , BYTE , INTEGER , WORD, LONG, SINGLE, STRING , DEFBIT, DEFBYTE, DEFINT, DEFWORD.
MiscellaneousREM, ' , SWAP, END, STOP, CONST, DELAY, WAIT, WAITMS, GOTO, GOSUB, POWERDOWN, IDLE, DECLARE, CALL, SUB, END SUB, MAKEDEC, MAKEBCD, INP,OUT, ALIAS, DIM , ERASE, DATA, READ, RESTORE, INCR, DECR, PEEK, POKE, CPEEK, GETRC5.
Compiler directives$INCLUDE, $NOINIT, $BAUD and $CRYSTAL, $OBJ, $SERIALINPUT, $SERIALOUTPUT, $ROMSTART, $RAMSIZE, $RAMSTART, $MONSTART, $IRAMSTART, $DEFAULT XRAM, $ASM-$END ASM, $LCD.
Conditional compilation#IF, #ELSE, #ENDIF
String manipulationSTRING, SPACE, LEFT, RIGHT, MID, VAL, HEXVAL, LEN, STR, HEX, LCASE, UCASE
To make a program takes just a few steps :
Write the program in BASIC
Compile it to fast machine binary code
Test the result with the integrated simulator(with additional hardware you can simulate the hardware too)
Program the chip with one of the integrated programmers.(hardware must be purchased separately)
Subscribe to:
Posts (Atom)
