1. S3C2410A used as the main controller chip (A-type for mass production, X-BUG-A in on the amendment)2. Interfaces are all located in the side of the circuit board, user-friendly installation directly.
3. Board long 18.00cm, wide-11.00cm, width ratio close to the long golden ratio, making the user's device can be the smallest in the area have a better look
4. TV and VGA interface, the stability of the TV / VGA output functions can be done on display in 800X600 resolution does not flicker on television can output a stable image 4. SD card interface (in the back)
5. Two RS232 serial port (at the plate after a DB9 interface leads, and the other with on-board raises from the pin 2.54mm)
6. Audio output interface and a microphone input interface
7. The two main USB interface (HOST), a USB interface from the (Device)
8. In the on-board raises LCD touch screen and full-featured interface
9. SPI / IIC interface
10. 16 data bus, 21 address bus CPU bus interface
11. 4 Channel, 10bit ADC input interface
12. JTAG debug access / Programming Interface
13. 8 button keyboard interface (one of the keys is reset button, the button can have another 1x7 to 7x1 or a combination of a variety of mix and match)
14. RJ45 10BASE-T Ethernet interface
15. IDE interface with the expansion of the capacity expansion bus interface, the IDE drive is currently not yet completed
16. To use as a development board, with Samsung's 64MB NAND FLASH, 64MB PC133 SDRAM (32bit)
Later I will show you the real time operation of it...
No comments:
Post a Comment